20.109(F17): Notes for orientation

From Course Wiki
Jump to: navigation, search
20.109(F17): Laboratory Fundamentals of Biological Engineering

Fa17 banner image.png

Fa17 Schedule        Announcements        Assignments        Homework        Communication
       1. Measuring Genomic Instability        2. Manipulating Metabolism        3. Engineering Biomaterials              


Station 1: pipetting

Prepare at TA bench:

  • pipet tips
  • P1000 and P200
  • cuvettes
  • 2x 50 mL of DI water in conical tubes
  • 1x 13 mL XC 0.01% in conical tubes

Each group uses:

  • ~10 mL water
  • ~ mL XC 0.01%
  • 10 non-UV cuvettes

Station 2: making solutions

At the balance:

  • Dextrose in 50 mL conical tubes, ~ 3/4 full, 3 of them
  • Check weigh boat and stir bar stocks, wash spatulas

All across from Yellow group bench:

  • 8x 50 mL conical tubes
  • 2x small graduated cylinders (100 mL)
  • 2x 0.5 L media bottle filled with distilled water, 2 sets only
  • 8x 25 mL pipets, 1 per team plus 2 extra
  • 2x pipet bulbs, 2 only

Station 3: spectrophotometer

Specs should be turned on at the beginning of lab. Make sure the DU 730 wavelength scan is set to read between 300 and 900 nm. Prepare one set of reference solutions (prepared according to station 1), including a blank, and leave them on top of the DU 640.

Station 4: gel reading

Wipe down the equipment and the sample card with a damp paper towel to rid dust.

Station 5: lab safety

Be prepared to give hints about where to find the safety shower, fire blanket, and spill kits.

Station 6: graph data in Excel

Be prepared to answer questions about this version of Excel.

Station 7: lab math

Be prepared to answer questions about this version of basic lab math.

Station 8: TC room

Post cards with famous scientist names on the equipment indicated.