20.109(F15):TEM (Day4)
From Course Wiki
Revision as of 14:43, 17 November 2015 by MAXINE JONAS (Talk | contribs)
Introduction
The Transmission Electron Microscope (TEM) achieves its remarkable resolution by “illuminating” samples using an electron beam in a vacuum rather than using a conventional light source in air. Since the electron beam passes through the sample that is being examined, the sample must be sufficiently thin and sufficiently sturdy to be hit by electrons in a vacuum. It’s important to remember that many biological materials are damaged or destroyed by the incoming electrons and that the TEM can image only the species that survive this harsh treatment. The denser parts of the sample will absorb or scatter some of the electron beam, and it’s the scattered electrons or those that pass through the sample that are focused using an electromagnetic lens. This “electron shadow” then strikes a fluorescent screen, giving rise to an image that varies in darkness according to the sample's density. For samples that are amenable to TEM, this form of examination can allow observation of ångström-sized objects and of cellular details down to near atomic levels.Samples are applied to a wafer-thin "grid" before being loaded into the TEM and placed under vacuum. The grid can be made of many kinds of materials. All have lines of a conductive metal, in our case copper, that disperse the electron beam and thereby help keep the sample from being blown to bits by the energy in the beam. A carbon mesh is strung between the metal lines. Once a sample has been applied to the grid, only the portions that come to rest on the carbon mesh can be visualized, along with any imperfections in the carbon mesh itself.
Today will visualize the nanowires you generated on M3D1 to confirm that they were biomineralized with Fe(PO4).
Protocols
Part 1: Examining TEM images
- Today you will image the TEM grids that you prepared on Day 2. Due to space limitations, only 2-3 groups can join Prof. Belcher and George for the imaging at a time.
- Use the downtime to work on your Biomaterials engineering mini-report or your Research proposal presentation.
Next day: Battery assembly and testing
Previous day: Cathode construction